Shop By Products

Welcome.







NEW CLAMP ON AMMETER NEEDLE TYPE (MAX WIRE DIAM. is 16mm or 0.63 inchess ) ULW26-32-5P NEW UL-LISTED 30 AMP CAM OPERATED 5 POSITION ROTARY CHANGEOVER SWITCH*
CLAMP-ON AMMETER NEEDLE -TYPE Transfer Switch, Change over switch, Rotary switch, Trailer Park Pedestal, Manual Transfer switch, Universal Transfer Switch, Toronto, Ontario, Canada, USA, Florida, Atlanta, East Coast, West Coast, Automatic Transfer Switch, RV, Boat Transfer Switch
"CLICK HERE TO ORDER"

Build your own transfer switch using this 30A, 5 position, 3 pole changeover switch. Break Berore Make design. OFF position between two circuits for guaranteed "no backfeed".

UL LISTED
CM3P32 NEW CE-MARK 30 AMP CAM OPERATED 3 POSITION ROTARY CHANGEOVER SWITCH* NEW CLAMP ON AMMETER NEEDLE TYPE (MAX WIRE DIAM. is 27mm or 1.063 inches)
Transfer Switch, Change over switch, Rotary switch, Trailer Park Pedestal, Manual Transfer switch, Universal Transfer Switch, Toronto, Ontario, Canada, USA, Florida, Atlanta, East Coast, West Coast, Automatic Transfer Switch, RV, Boat Transfer Switch CLAMP-ON AMMETER ANALOG NEEDLE TYPE MODEL MG28
"CLICK HERE TO ORDER"

Build your own transfer switch using this 30A, 3 position, 3 pole changeover switch. Break Berore Make design. OFF position between two circuits for guaranteed "no backfeed".
USED WILLET (VIDEOJET 210) Label Applicator ( Blow Module) NEW TIME DELAY TIMER, 8 PINS, 0 TO 60 MINUTES
USED WILLET (VIDEOJET 210) Label Applicator ( Blow Module) TIME DELAY TIMER, 8 PINS, 0 TO 60 MINUTES
Used Willet 210 (now owned by VIDEOJET) label applicator. This applicator is set-up to blow label on top ofthe product.

Model: Willet 210
Voltage: 110/230 VAC
Weight of Applicator Ony; 23KG

Complete with conveyor with fixed speed. No need for variable speed controls as the applicator is equipped with product delay
sensor.

Currently set-up to put round label of approximately 1.5 inches in diameter.